The arrival of DTT or Digital Terrestrial Television in the UK has seen the appearance of a new type of antenna amplifier. Indeed, the analog amplifiers of yesteryear were not adapted to this new technology. And the DTT antenna amplifier has allowed the removal of pixelated and frozen images. To find the right one for you, we invite you to read this guide.
Here is our commitment, to make sure that we provide the best user experience and content quality:
You can support us by using our links to make your purchases (at no extra cost to you)! This sometimes earns us a commission which allows us to remain independent. More about us
Our selection
"With the ELAP 4G, this manufacturer offers us an excellent DTT antenna amplifier with an excellent quality/price ratio. Equipped with 6 outputs, it works with…"
"To boost the DTT signal, picture and sound quality of your digital terrestrial decoder, use the Echosat HD-Line. It offers excellent signal gain and features…"
"To boost the reception of your DTT antenna, buy the High-Tech 372018. This DTT antenna amplifier will not disappoint you, especially with its durability and…"
"Receive stable DTT signals where reception is poor with the HDSat DTT antenna amplifier. Both single and multi-channel, it benefits from the presence of an…"
With the ELAP 4G, this manufacturer offers us an excellent DTT antenna amplifier with an excellent quality/price ratio. Equipped with 6 outputs, it works with cable and DTT.
43,18 £ on CdiscountTo boost the DTT signal, picture and sound quality of your digital terrestrial decoder, use the Echosat HD-Line. It offers excellent signal gain and features an integrated 4-way splitter.
23,92 £ on AmazonThe Echosat HD-Line DTT antenna amplifier allows you to amplify and distribute the DTT signal to 4 TV sets. You can also use it to amplify UHF frequencies. It is a model with adjustable gain up to 27 dB on each output channel. The adjustment of the image quality is done at the input and allows you to permanently remove the effects of mosaic or pixelation. The output ports have a reinforced shielding, perfect to eliminate noise. It is a DTT antenna amplifier intended for indoor use. Moreover, you can fix it to the wall to limit the clutter.
To boost the reception of your DTT antenna, buy the High-Tech 372018. This DTT antenna amplifier will not disappoint you, especially with its durability and the 8 outputs it offers.
56,40 £ on CdiscountThe ELAP 372018 is a shielded DTT distribution amplifier with an integrated 230V power supply. It is equipped with an LED indicator that turns green when the setting is optimal to ensure quality DTT reception. This amplifier improves the quality of DTT signals and removes mosaics and pixels, it has a manual adjustment of the signal quality to reduce the error rate of the digital signal. The multiple outputs allow to distribute the signals on 8 TV sets: 4 outputs with 40 dB gain and 4 others with 20 dB gain. Finally, the bandwidth is limited to 694 MHz (C21 to 48) to protect your DTT decoder from disturbances due to the 4G network.
Receive stable DTT signals where reception is poor with the HDSat DTT antenna amplifier. Both single and multi-channel, it benefits from the presence of an integrated gain regulator.
31,96 £ on AmazonThe HDSat DTT antenna amplifier will be perfect to solve the problems of interference and lack of signal around your home. Equipped with F-type connectors, it offers 1 input and 4 outputs, while having its own 220 V power supply. The signal gain is adjustable from 10 to 25 dB. By offering a good number of channels, this DTT antenna amplifier will satisfy your expectations. It has a high reliability and allows to improve considerably the reception of DTT signals. Its fully automated operation can only please you.
Any specific needs?
The best DTT antenna amplifier in 2021
The best entry-level DTT antenna amplifier
The best high-end DTT antenna amplifier
Your guide :
Rate this buying guide :By rating this buying guide, you are helping us to reward our best writers. Thank you!
TOP OF THE TOP | CHEAP | TOP OF THE LINE | EXCELLENT | |
In accordance with our commitment, this buying guide does not contain any sponsored products. |
9/10 |
8/10 |
8/10 |
8/10 |
OUR SELECTION |
ELAP 4G
|
Echosat HD-Line
|
ELAP 372018
|
HDSat
|
With the ELAP 4G, this manufacturer offers us an excellent DTT antenna amplifier with an excellent quality/price ratio. Equipped with 6 outputs, it works with cable and DTT.
|
To boost the DTT signal, picture and sound quality of your digital terrestrial decoder, use the Echosat HD-Line. It offers excellent signal gain and features an integrated 4-way splitter.
|
To boost the reception of your DTT antenna, buy the High-Tech 372018. This DTT antenna amplifier will not disappoint you, especially with its durability and the 8 outputs it offers.
|
Receive stable DTT signals where reception is poor with the HDSat DTT antenna amplifier. Both single and multi-channel, it benefits from the presence of an integrated gain regulator.
|
|
Number of outputs
|
6
|
4
|
8
|
4
|
Adjustable gain
|
Yes
|
Yes
|
Yes
|
Yes
|
UHF/VHF amplification
|
Yes
|
Yes
|
Yes
|
Yes
|
Built-in splitter
|
Yes
|
27 dB
|
Yes
|
10 to 25 dB
|
Signal enhancement
|
24 dB
|
|
4 outputs 40 dB and 4 outputs 20 dB
|
|
Help us improve this table:
Report an error, request the addition of a feature to the table, or suggest another product. Thank you for your kindness!
We spend thousands of hours each year studying the major specialized websites, analyzing products of hundreds of brands and reading user feedback to advise you on the best products.
We are a product review company with a single mission: to simplify your buying decisions. Our research and testing helps millions of people every year find the best products for their personal needs and budget.
To support us you can: use our links to make your purchases (which often earns us a small commission), share our articles on social networks, or recommend our site on your blog. Thanks in advance for your support!
There are 3 types of DTT antenna amplifiers: broadband DTT antenna amplifiers, fixed gain DTT amplifiers and selective DTT amplifiers. Each type of antenna has its own specificities and is mainly distinguished by their method of signal amplification. The broadband model amplifies the DTT signal by scanning the entire existing terrestrial signal. The fixed gain model, on the other hand, is mainly concerned with finding the most stable signal across a single frequency. It could also be that the best suited to your needs is a selective DTT antenna amplifier.
The level of efficiency of a DTT antenna amplifier is largely conditioned by the range it has. This is called the signal gain. This value is expressed in decibels (dB). The higher the number of decibels, the better.
Check the number of input and output channels. The best models are those that have multiple channels and can be connected to up to ten TVs. You need to think about whether you really need that many channels. Also, just because a model has multiple channels doesn't mean it's good. This criterion is not an indication of efficiency, but of practicality.
Gone are the days when antennas and its components had a sloppy design. Today, you can easily find a DTT antenna amplifier that will not clash with the general decor of your TV corner. But be careful not to focus too much on this criterion at the expense of what really matters.
The DTT antenna amplifier you are going to buy should be able to be assembled and installed without too many tools and without too much difficulty. It should be able to be installed either on the antenna or near the antenna so that you can have adequate reception. Moreover, this is why we always recommend you to buy a model that comes with an installation manual in French.
There should always be a good reason why you choose to use a DTT antenna amplifier. By the way, it is not for nothing that DVB-T antennas do not always come with an amplifier as standard.
Amplifiers can cause problems if you don't need them or if they are not used properly. You might encounter problems like:
On the market there are 3 main types of DTT antenna amplifiers. Each type has its own characteristics and uses its own technique to amplify DTT signals. If you want to know which one is best for you, read on.
Selective or gain DTT antenna amplifiers can amplify signals from a specific frequency band. Sometimes it is also called a gain-controlled DTT antenna amplifier, because this model is able to amplify signals from multiple channels in the same frequency band simultaneously, especially when there is interference or jamming.
In contrast to
an adjustable gain model, a fixed gain DTT antenna amplifier scans only one frequency to amplify its signal. This type of amplifier guarantees more stable signals, but limits the frequency band that can be amplified. You won't have much room to maneuver. In addition, it can sequentially amplify all the signals in the band, allowing the receiver to perceive all the sound emitted by the transmitter.
Wideband DTT antenna amplifiers cover the entire spectrum of the DTT signal to amplify as many frequencies as possible at the same time. Therefore, it is the most versatile type and has the highest signal gain. Generally, there are two output channels on a broadband DTT antenna amplifier: a mono output and a multiple output.
By using an amplifier for your DTT antenna, you will benefit from many advantages. First, you will definitely say goodbye to saturated sounds and blurred or pixelated images. Secondly, this type of equipment guarantees a better audiovisual quality, because all interference between the antenna and the decoder is corrected. However, if the interference comes from upstream of the antenna, an amplifier will not be able to do anything.
The TV splitter allows to receive the signal received by the antenna and to distribute it throughout the house. Once the antenna receives the signal, the DTT splitter broadcasts it to several output channels, creating a signal loss corresponding to the number of its outputs. The disadvantage of using this device is that you will always have to take care to limit this loss by always looking for the right location for your equipment.
Both the amplifier and the splitter aim to improve the viewing experience of your programs, movies and series through your DTT decoder. Moreover, if the amplifier focuses on improving the quality of sound and image, the splitter will distribute the signal from the antenna and redistribute it throughout your home, without changing the original quality.
Call a professional if you have poor reception after installation
It is a good idea to call a professional if you have poor reception of DTT. He will be able to observe the condition of the amplifier and the antenna. However, in the meantime, you can check the connection of the cables if they are too bent, too compressed...
Follow the instructions carefully
To
put the amplifier into operation, you should connect the coaxial cable from the antenna to the input and the decoder cable to the output of the amplifier while making the connection between the cables
.
Use a panel antenna for better amplification
Use
a panel antenna with a signal amplifier to receive a good signal from different transmitters. This is an excellent ground antenna that can focus in several directions accurately.
Anti-interference ferrites to reduce signal interference
In order
to limit interference on the signal, favor antennas with cables that have anti-interference ferrites
.
Clean your DTT amplifier
The
amplifier can be cleaned with a feather duster or a microfiber. Its front panel can also be cleaned gently with a degreasing lotion and a soft cloth.
The best DVB-T antenna amplifier depends on your needs and your budget. Read our buying guide to find out which products are the best.
To improve the quality of TV reception, turn to the mast amplifier, which is a box-shaped device. This preamplifier is to be installed near the antenna.
A signal that is too weak or that suffers losses on the way to the antenna may lead you to use a TV amplifier or a preamplifier.
The amplifier should be installed in the location closest to the antenna. However, you can try to place the box near the decoder or TV.
Connect the digital coaxial cable to the output channel of your TV. Plug the other end of the cable into the appropriate socket on your DTT decoder.
Every month we help more than 1 000 000 people buy better and smarter.
Copyright © 2022 - Made with ♥ by buyingbetter.co.uk
Your reviews and buying guides 0% advertising, 100% independent!