The gas-fired radiator is very practical during the winter months. High-performance, discreet and economical, all you need to do is connect it to a heat pump (PAC) or a boiler so that it can provide you with invaluable thermal comfort thanks to its gentle and uniform heat. Are you tempted by this device? Let's take a closer look and discover the best gas radiators of the moment.
Here is our commitment, to make sure that we provide the best user experience and content quality:
You can support us by using our links to make your purchases (at no extra cost to you)! This sometimes earns us a commission which allows us to remain independent. More about us
Our selection
"Discreet but effective, the Acova Planea PLV-056-090 is the single horizontal gas heater that offers the best value for money in our ranking."
"The Delgado HTR5 is a stylish, efficient and very easy to install gas heater. It is ideal for a bathroom with a maximum surface area…"
"The Hudson Reed Vitality comes with a 20-year warranty and is one of the most powerful gas heaters available today. Best of all, it's ultra…"
"Lightweight and easy to install, the Hudson Reed Aurora Gas Heater will bring comfortable and pleasant warmth to your home all winter long."
Discreet but effective, the Acova Planea PLV-056-090 is the single horizontal gas heater that offers the best value for money in our ranking.
286 £ on ManomanoThe Acova Planea PLV-056-090 has a nominal power of 527 W for a maximum pressure of 5 bar. Its slim design(5.5 cm thick) has major advantages. It contains less water, which improves its reactivity. In addition, the heat build-up is fast and even. The thin profile of the radiator also makes it more aesthetic. It takes up less space in a home and fits discreetly into the decor.
Despite this slimness, the Acova Planea PLV-056-090 has a large surface area to spread the heat. This optimizes its heating qualities and makes it an efficient and energy-saving gas heater. Yet it is offered at a very attractive price.
The Delgado HTR5 is a stylish, efficient and very easy to install gas heater. It is ideal for a bathroom with a maximum surface area of 10 m².
91,99 £ on ManomanoAt first glance, the Delgado HTR5 looks more like a decorative piece than a radiator. The tubes are vertically arranged and finished to make it a decorative piece in its own right. It is, however, a radiator. It can be connected to a gas heater, a solar water heater and even an electric circuit. Wall installation and connection to the central heating system are simple.
The Delgado HTR5 offers a maximum output of 508 W. It is ideal for heating a room of 10 m². This radiator will mainly find its place in your bathroom. It will provide a pleasant and gentle warmth even during the harshest of winters.
The Hudson Reed Vitality comes with a 20-year warranty and is one of the most powerful gas heaters available today. Best of all, it's ultra lightweight, recyclable and durable.
400 £ on ManomanoThe Hudson Reed Vitality offers a maximum power of 2047 W. This radiator is therefore able to heat a room of 30 m² without any problem. Its steel walls heat up very quickly. You won't have to wait for long minutes to enjoy its pleasant heat. It remains incredibly efficient despite the fact that it contains very little water.
The Hudson Reed Vitality offers excellent performance despite its small size. It takes up very little wall space. The unit also shines with its durability. It comes with a 20-year manufacturer's warranty. This already reflects the life of the heater itself. By purchasing the Hudson Reed Vitality, you are making an investment that will pay off in the long run.
Lightweight and easy to install, the Hudson Reed Aurora Gas Heater will bring comfortable and pleasant warmth to your home all winter long.
248 £ on ManomanoThe Hudson Reed Aurora is a vertical aluminum radiator. This profile allows it to remain unobtrusive on the wall surface while maintaining an elegant design. The aluminum walls heat up quickly and redistribute the temperature evenly. The temperature rise is comfortable and fast. Installation is also simple thanks to the central connection system.
With its maximum output of 920 W, the Hudson Reed Aurora is powerful enough to heat a room of 10 m² and more efficiently and comfortably. The unit is durable. Moreover, it comes with a 10-year manufacturer's warranty. Note that this model does not come with a radiator valve.
Any specific needs?
The best gas heater radiator in 2021
The best entry-level gas heater radiator
The best premium gas heater radiator
Your guide :
Rate this buying guide :By rating this buying guide, you are helping us to reward our best writers. Thank you!
| THE BEST | CHEAP | TOP OF THE LINE | ALTERNATIVE | |
In accordance with our commitment, this buying guide does not contain any sponsored products. |
9/10 |
7/10 |
9/10 |
8/10 |
| OUR SELECTION |
Acova Planea PLV-056-090
|
Delgado HTR5
|
Hudson Reed Vitality
|
Hudson Reed Aurora
|
|
Discreet but effective, the Acova Planea PLV-056-090 is the single horizontal gas heater that offers the best value for money in our ranking.
|
The Delgado HTR5 is a stylish, efficient and very easy to install gas heater. It is ideal for a bathroom with a maximum surface area of 10 m².
|
The Hudson Reed Vitality comes with a 20-year warranty and is one of the most powerful gas heaters available today. Best of all, it's ultra lightweight, recyclable and durable.
|
Lightweight and easy to install, the Hudson Reed Aurora Gas Heater will bring comfortable and pleasant warmth to your home all winter long.
|
|
|
Heating capacity
|
527 W
|
508 W
|
2047 W
|
920 W
|
|
Material
|
Fonte
|
Steel
|
Steel
|
Aluminum
|
|
Profile
|
Horizontal
|
Vertical
|
Vertical
|
Vertical
|
|
Weight
|
13,1 kg
|
8.1 kg
|
51.5 kg
|
-
|
|
Dimensions
|
56 x 90 x 55 cm
|
120 x 25 x 6.5 cm
|
160 x 59 x 7.8 cm
|
160 x 28 x 4.7 cm
|
Help us improve this table:
Report an error, request the addition of a feature to the table, or suggest another product. Thank you for your kindness!
We spend thousands of hours each year studying the major specialized websites, analyzing products of hundreds of brands and reading user feedback to advise you on the best products.
We are a product review company with a single mission: to simplify your buying decisions. Our research and testing helps millions of people every year find the best products for their personal needs and budget.
To support us you can: use our links to make your purchases (which often earns us a small commission), share our articles on social networks, or recommend our site on your blog. Thanks in advance for your support!
The ideal power of a gas heater depends on two factors: the size of the room and the quality of its insulation. The larger the area to be heated, the more power the radiator will need. A well insulated house will require less heating power than a poorly insulated apartment. In both cases, the power is expressed in watts or kilowatts.
On average, it takes 1,000 W to heat a 10 m² area. The quality of the insulation will then come into play to increase or decrease the necessary power. It is important to know that if the chosen radiator is not powerful enough, the heating quality will be reduced. The appliance will also be more solicited, which will increase energy consumption.
The gas heating radiator is connected to a central heating system. The latter can be individual or collective (PAC, boiler, solar water heater...). The heat will be retransmitted in the room by convection and radiation. This transmission of the temperature can be strong or low.
The radiators for high heat gas heating heat very quickly, but consume a lot of energy. The surface of the radiator will be hot. Low temperature models heat gently and slowly. The walls of the radiator are less hot and the energy consumption is lower. Nevertheless, the heating performance will be moderate.
The gas heating radiators meet several European standards. All models on the market must meet the CE safety standard. If you are looking for a model that meets more stringent safety standards, choose for a gas heating radiator that is NF certified. More recently, the RAL standard governs environmentally friendly radiators.
The various features offered on a gas heating radiator make it easy to use. The presence of an electronic thermostat will help you set the temperature with great precision. The programmable timer automatically turns the heater on and off according to the settings you choose. The multi-level power setting is also a very useful feature to control energy consumption. These different settings can be done from a remote control on some units.
This type of radiator can be connected to two types of gas heating. It can be natural gas directly connected to the urban distribution network or propane. Natural gas, also called city gas, is very accessible. It is distributed through a network already present in most urban dwellings. All you have to do is connect the heater to the existing distribution network. Installation is easy and requires no storage.
This is not the case with propane. The gas is stored in a special tank that must be replenished regularly. This is also the case with LPG which is a fairly common heating method. These solutions are recommended for homes that are not covered by the natural gas distribution network.
You can connect the gas heating radiator to a heat pump (PAC) which is often found on collective gas heating systems. The solar water heater is also another heat source that can be connected to this type of radiators.
The installation of gas-fired radiators is relatively complex. Safety procedures must be followed to avoid any risk of accident with the system that involves fuels, in this case gas, and hot water. The best method of installation must be found. There are several possible circuit diagrams:
The series circuit: it consists in connecting a first radiator to the boiler. The water then passes to a second radiator, then to another and so on until it returns to the boiler. This circuit is very simple. Nevertheless, the operation of a radiator is conditioned by the activation of the one placed upstream of the circuit.
The single-pipe circuit: it is similar to the series connection of radiators for gas heating. The difference lies in the fact that in a single-pipe circuit, it is possible to switch off one radiator without affecting the operation of the others.
The two-pipe circuit: this is the most common type of installation of radiators for gas heating. The circuit consists of tubes. The first tube is used to carry hot water from the boiler to the radiators. The second tube is used as a cold water circuit.
The octopus circuit: this method of installation involves the establishment of an independent circuit to connect each radiator directly to the boiler. The octopus circuit sometimes requires more means and work. However, it is the best solution for some homes where it is complex or impossible to connect all the radiators to a single circuit.
The choice of the type of circuit depends on the house, the central heating system, the surface to be heated and the constraints to which the installation of the radiators is subjected. Make the choice in agreement with your service provider. Indeed, the installation of a circuit of radiators for gas heating must be entrusted to a professional.
Cast iron gas heaters are known for their very high thermal inertia. The heater heats up very slowly, but stores the heat to redistribute it gradually. The radiator continues to heat the room for many minutes after it is turned off. This makes it ideal for homes with poor insulation or in very cold areas.
Cast iron does have a few drawbacks, however. The material is very heavy, which makes it difficult to install radiators. It is also expensive compared to other metals used in the manufacture of the heater.
Steel is less solid than cast iron. Steel gas heating radiators are lighter and easier to install. They are also thinner, which is a major aesthetic advantage. Steel radiators heat up very quickly. They reach the ideal heating temperature in record time.
On the other hand, their thermal inertia is low. The appliance cools as quickly as it heats. Thus, the steel gas heating radiator is mostly mounted in homes that have excellent insulation.
Aluminum models are very often presented as the best gas heating radiators. Aluminum shares with steel its fast temperature rise while being lighter and aesthetically pleasing. It equals the thermal inertia of cast iron, allowing for an even and progressive distribution of heat.
The price will be one of the major disadvantages of the aluminum radiator for gas heating. It costs more than cast iron or steel radiators. However, it is more exposed to corrosion. Regular maintenance is required to ensure its longevity.
The concept of a gas heater is quite simple. The gas (natural, LPG, propane...) comes into contact with the air and causes combustion. The heat from the combustion is transmitted to the water circulating in the central heating circuit. This same heat ends up on the walls of the radiator through which the hot water passes. It is redistributed in the room by radiation and convection.
This type of heating device is efficient. It offers excellent thermal comfort and good control of energy consumption. On the other hand, its installation is rather complex and costly. Moreover, the natural gas distribution network is not accessible everywhere. You have to fall back on LPG or propane, which is rather polluting and requires storage space in the home.
As its name suggests, the electric radiator is directly powered by the electrical network. The current heats a resistor that will transmit its heat to the walls of the radiator. The distribution of this heat is done by radiation or convection depending on the model. The installation of this type of radiators is simple and relatively affordable.
However, it is important to choose the right model. Some electric radiators can dry out the ambient air, while others have low efficiency. It will be necessary to pay a particular attention to the choice of the electric radiator adapted to its housing. Electric heating is the most expensive of all the current heating solutions in the UK.
The gas heating radiator is ideal if you are connected to the city gas distribution network or if your home already has a gas central heating system. It will offer you the best thermal comfort and an excellent performance. The electric radiator is more suitable if you have a limited budget for installation. On the other hand, it will be more expensive to operate in the long term.
Thermal comfort is one of the major advantages of gas-fired radiators. The transmission of heat by radiation and convection brings a homogeneous rise in temperature and does not dry out the air. Of course, you will be free to choose a heating temperature thanks to a thermostat. With this type of heating, you will keep a pleasant heat in your home even during the harshest winters.
This type of radiators is directly connected to the central heating system. The heating circuit is therefore present throughout the home. Thus, you can install one or more radiators in all living rooms to enjoy their warmth in winter. They will be connected to a single heating circuit, but each radiator can operate independently of the others depending on the type of circuit.
As in many European countries, natural gas is more affordable than electricity in the UK. The operating cost of a gas heating radiator will be less expensive than that of an electric radiator in the long term. This puts the higher purchase and installation cost of gas heating into perspective.
Natural gas is distributed through a network of underground pipelines. Its supply is not affected by the vagaries of weather. There is less risk of gas cuts than of power cuts. You will therefore be sure to have a heating solution at all times if you opt for this type of heater.
Gas heating is one of the most durable heating systems. It has an exceptional longevity compared to other heating systems. The radiators connected to gas heaters are just as robust and require almost no special maintenance. You will therefore make an excellent investment by choosing a gas heating system.
In our opinion, the best brands of radiators for gas heating in 2022 are :
Acova is one of the leaders in the heating equipment market in the UK. The French manufacturer offers a wide range of radiators and towel dryers adapted to all needs and all homes. With 50 years of experience, Acova offers high quality, reliable and durable products.
Delgado is the subsidiary of the Besoa Group, the European leader in interior furniture and comfort appliances for the home. The brand specializes in radiators of all kinds, including models designed for gas heating. Besoa Delgado stands out from all its competitors by offering very competitive prices on good quality radiators.
Since 2005, Hudson Reed has been manufacturing and marketing bathroom items and heating appliances in the UK and Europe. These products are sold exclusively online. The brand shines by the performance of these heaters, but also by their very interesting quality/price ratios.
Loden is specialized in affordable hot water radiators. The manufacturer therefore seduces by offering mainly entry-level and mid-range appliances accessible to all budgets. This does not mean that these radiators are of poor quality. On the contrary, Loden radiators are efficient and incredibly long-lasting.
Warmehaus offers affordable, innovative and durable indoor heating solutions. The manufacturer brings German technological know-how to the forefront to develop modern, powerful radiators that offer exceptional efficiency. In addition to quality and performance, the design, always original and sought after, is one of the great assets of the brand's products.
The diagram below will help you to get an idea of the typical prices for each price range (entry-level, mid-range and high-end).
However, more expensive does not necessarily mean better.
We therefore advise you to always consult our ranking before deciding, rather than blindly relying on price ranges.
Individual thermostatic valves
It is very advantageous to install thermostatic valves on each radiator connected to the gas heating system. They allow the heating temperature of each radiator to be adjusted individually. In this way, certain rooms, which are warmer, will not be overheated, leading to a reduction in the energy consumption of your central heating system.
Improve the insulation of your home
The best way to reduce energy consumption related to heating is to optimize the insulation of the home. There are new standards that govern this improvement in thermal insulation. This requires a relatively large investment. You could, nevertheless, ask for an advantageous credit and take advantage of various state aids for this type of work. The cost of the renovation will be paid back by the decrease in energy bills in the long term.
Close all openings properly
The openings, doors and windows, are great sources of heat loss if they are open. When you activate a gas heater, remember to close the doors and windows in the room. The temperature will rise more quickly and your heater will be more efficient without being overworked. You'll see significant energy savings in the long run.
Re-seal your windows
If, for some reason, you can't re-insulate your home, there is still an option. You can always redo the joints of the openings, especially at the windows. The operation is much less expensive. It already helps to limit a good part of the heat loss in the house or apartment.
Maintain your gas tanks
The radiators are connected to a boiler and a gas tank (LPG, propane...) if the source is not from the city gas network. These installations require regular maintenance. Carry out this maintenance to ensure that the heating system is working optimally. This will also help reduce your energy bills.
The gas heater is powered by a central heating system. This can be natural gas, CAP, LPG, propane or a solar water heater. These gas energy sources heat the water contained in the circuit to distribute it to the radiator. This hot water transmits heat to the walls of the radiator which distributes it to the room.
Town gas heating, as its name suggests, uses natural gas as its main energy source. The heater is connected to the domestic gas distribution system. This gas produces combustion to heat the water in the heating system. This water will provide heat throughout the home via radiators and underfloor heating systems connected to the system.
Wood heating is the most affordable in terms of price. It is less expensive than all other heating methods. However, it is less clean and less environmentally friendly than electricity. Gas heat is more expensive to install. On the other hand, it is less expensive to operate since gas is less expensive than electricity in the UK.
Generally speaking, the heating system best suited to a home depends on several factors. The climate of the region, the age of the dwelling and its surface, the quality of the insulation or the budget available to the owners are to be taken into account. Gas heating is especially suitable for houses located in very cold regions.
Every month we help more than 1 000 000 people buy better and smarter.
Copyright © 2022 - Made with ♥ by buyingbetter.co.uk
Your reviews and buying guides 0% advertising, 100% independent!
