Nailing a frame requires time and a large quantity of nails. We suggest that you save time by purchasing a framing nailer. This pneumatic or electric tool can drive nails of all kinds on all types of wood. Discover our comparative guide of the best carpentry nailers.
Here is our commitment, to make sure that we provide the best user experience and content quality:
You can support us by using our links to make your purchases (at no extra cost to you)! This sometimes earns us a commission which allows us to remain independent. More about us
Our selection
"Nailer and stapler at the same time, this model signed Dewalt allows to control both the brad and the staples. Light, powerful and ergonomic, this…"
"Handy, safe and competitively priced, this pneumatic framing nailer is a 2-in-1 tool that can be transformed into a stapler at will."
"The Silverline 10000339 nailer is what you need to get the job done right. It perfectly combines maneuverability with striking power."
"The Tacwise 1177 has good penetration, perfect for installing baseboards. Don't hesitate to finish with a hammer if you need to perfect your work, especially…"
Nailer and stapler at the same time, this model signed Dewalt allows to control both the brad and the staples. Light, powerful and ergonomic, this tool represents an excellent quality/price ratio.
133 £ on AmazonThis combination tool will allow you to alternate between nailing and stapling. It is a pneumatic tool, which means there is no need for a power supply to operate it. It is powered by compressed air. It holds nails from 15 to 40 mm in length and has a belt feeder that can hold 100 nails at a time. In short, it has everything you need to work in the best conditions.
Thanks to its ergonomic handle coated with a layer of rubber, it is comfortable to hold, an important detail on a tool intended for professional use. This package also includes a box of 5000 18 G finishing nails. All in all, buying it is an excellent deal, given the device's exceptional performance and handling. You won't notice the hours passing by as you'll be absorbed in the work with this nailer in hand.
Handy, safe and competitively priced, this pneumatic framing nailer is a 2-in-1 tool that can be transformed into a stapler at will.
55,03 £ on ManomanoThe Silverline 10000339 nailer is what you need to get the job done right. It perfectly combines maneuverability with striking power.
252 £ on ManomanoThe Tacwise 1177 has good penetration, perfect for installing baseboards. Don't hesitate to finish with a hammer if you need to perfect your work, especially on hardwoods.
119 £ on ManomanoThis tool has all the features to work in the best conditions. With a powerful and efficient electric motor, the Tacwise 1177 framing nailer is perfect for intensive and repetitive nailing jobs. It has an improved ejection mechanism to give you good penetration on all types of medium thickness wood. If you are working on thicker wood, be careful not to overdrive, you should be able to do so without endangering the integrity of the device.
With its weight of only 1.6 kg, you will have in hand a tool as light as powerful. A carrying case is included in your order. You will have no trouble using this device for any work concerning your frame or floor covering. However, when working on thicker woods, take the time to double check the nails and finish with the hand hammer if necessary.
Any specific needs?
The best framing nailer in 2021
The best entry-level framing nailer
The best high-end framing nailer
Your guide :
Rate this buying guide :By rating this buying guide, you are helping us to reward our best writers. Thank you!
TOP OF THE TOP | CHEAP | TOP OF THE LINE | VERY GOOD | |
In accordance with our commitment, this buying guide does not contain any sponsored products. |
9/10 |
7/10 |
9/10 |
7/10 |
OUR SELECTION |
Dewalt DPSB2IN1-XJ 18
|
Güde Set KN 14
|
Silverline 10000339
|
Tacwise 1177
|
Nailer and stapler at the same time, this model signed Dewalt allows to control both the brad and the staples. Light, powerful and ergonomic, this tool represents an excellent quality/price ratio.
|
Handy, safe and competitively priced, this pneumatic framing nailer is a 2-in-1 tool that can be transformed into a stapler at will.
|
The Silverline 10000339 nailer is what you need to get the job done right. It perfectly combines maneuverability with striking power.
|
The Tacwise 1177 has good penetration, perfect for installing baseboards. Don't hesitate to finish with a hammer if you need to perfect your work, especially on hardwoods.
|
|
Power supply
|
Pneumatic
|
Pneumatic
|
Pneumatic
|
Electric
|
Binding range
|
15 - 40 mm
|
15 - 40 mm
|
50-90 mm
|
15 - 35 mm
|
Capacity
|
100 nails
|
100 nails
|
90 nails
|
100 nails
|
Width
|
9.6 cm
|
22.2 cm
|
12.6 cm
|
25,5 cm
|
Weight
|
1.2 kg
|
2.9 kg
|
2 kg
|
1,6 kg
|
Help us improve this table:
Report an error, request the addition of a feature to the table, or suggest another product. Thank you for your kindness!
We spend thousands of hours each year studying the major specialized websites, analyzing products of hundreds of brands and reading user feedback to advise you on the best products.
We are a product review company with a single mission: to simplify your buying decisions. Our research and testing helps millions of people every year find the best products for their personal needs and budget.
To support us you can: use our links to make your purchases (which often earns us a small commission), share our articles on social networks, or recommend our site on your blog. Thanks in advance for your support!
If the work you plan to do requires a lot of freedom of movement, you should choose a battery-powered carpentry nailer with a high voltage (in Volts) and current (in Ah). Although it is heavier and less autonomous than a pneumatic model, it allows you to work at height with ease, especially since it is easy to handle.
For large jobs, for example on thick, hard wood, we recommend a pneumatic nailer. You will benefit from a consequent autonomy and power. The movements will be limited since it is supplied with compressed air via an air compressor.
There are 2 nailing modes namely sequential firing and continuous firing. The first being slower, you simply place the nailer's spout on the surface of the material to be worked and pull the trigger to deliver the nails. In burst mode, you pull the trigger to trigger the nail. This nailing mode is done in series and will save you time.
The ergonomics of your framing nailer holds an important place among the factors to consider. It is also important to pay attention to the weight and dimensions of the device. The main thing is to be able to handle it comfortably and safely.
For this, it must be light and easy to handle to avoid any risk of accident, with an ergonomic and non-slip handle to ensure an optimal grip. In case you are required to install a frame at height, to reach over your head or to stand on a ladder, prefer a model weighing between 3 to 5 kg.
The nails are usually stored in a specific compartment already integrated into the frame nailer. You can choose between 2 supply modes: coil or strip.
Whether it is battery powered (in volts) or pneumatic (in PSI), it is imperative to check the power rating of the framing nailer. It ensures you have consistent power despite working in hard surfaces. It ranges from 70-100 or 80-120 PSI for pneumatic models and from 7 to 20 volts for battery powered framing nailers. The higher the value, the more power the unit will have.
Today's framing nailers incorporate a good number of extra features to give you maximum convenience in use. You will surely appreciate the depth adjustment knob if you want to work with materials of different thicknesses.
Safety and protection systems are a must, as are the LED indicators. These can inform you if the battery is low or if it is time to recharge the nail compartment. Sometimes, pneumatic framing nailers are equipped with a mechanism to adjust the direction of the exhaust.
While a framing nailer may seem easy to use because of its handle, it is very important to know how to use it properly for optimum performance. There are also a few precautions to take for safety. First, it is imperative that you carefully read the instructions provided in the manual that came with your equipment.
You should also wear protective gear such as helmets, gloves, and goggles to protect your eyes from splinters and wood chips. To begin with, you need to make sure that the wood to be spotted is stable. So please set it up first. Then, mark the parts to be spotted for fastening.
To use your framing nailer, either start the fire or make a shot. To fire, you'll need to hold the nailer in a space and then pull the trigger once to activate the shot. This ensures more precision and control.
Firing is more dangerous and allows less control than activating the shot. However, it offers more strength and saves a lot of time because the work will not last long. Here, the nozzle must be held in the hammered wooden surface. Each time the nozzle is compacted, the nail is pulled.
If the nail gets stuck and stops working, you need to disconnect the power, then you will need to connect it to start again. When you are not using your framing nailer, make sure that the power source is disconnected from the unit if it is turned off for any reason.
Characterized by a very powerful driving force, the pneumatic framing nailer is less energy consuming. It allows you to quickly assemble several pieces of wood with greater precision. Its operating principle is based on the movement of a piston that pushes the nail with a quantity of air. In other words, a simple air hose drives a fastener, but it does not strike like a hammer. The pneumatic framing nailer is often the favorite of professionals because it has several advantages.
The pneumatic nailer is easier to handle and helps save time because of its speed. Moreover, it is more resistant compared to the electric nailer. Paradoxically, this is a disadvantage because it cannot be used for all jobs. Moreover, it requires an air compressor to use it. And you have to master it well before you start handling it.
Less heavy than the pneumatic model, an electric framing nailer is much easier to use. Powered by mains or battery, it does not require the use of an expensive compressor. Corded models have unlimited runtime. It is also less noisy than its pneumatic counterpart. You won't have to worry about disturbing your neighbors.
In addition, the electric carpentry nailer does not need regular maintenance like oiling it from time to time. But it is not practical if you are doing a renovation project and need to turn off the power in the area you are working. Also, its striking power is less than that of a pneumatic nailer, not to mention that its cord length can limit you as well. And cordless models are limited by their battery life.
Whether it's the pneumatic framing nailer or the electric framing nailer, they both have their uses in DIY work. The first one is to be preferred for its power and its capacity to support the intensive uses. But it is better to choose the electric carpentry nailer for easy handling or occasional use, especially if you are learning to handle this tool.
Ease of use and precision
When you use a hammer to complete a framing job, you think it will be easy to use. The basic idea behind a hammer is simple enough, but using it effectively is a whole other story. The best solution is to use a framing nailer. Hitting the wood with the nozzle expels a nail. You can also pull the trigger for the same thing. There are no bent or twisted nails to contend with.
Speed
If you're trying to do a job on your own, a framing nailer can get the job done quickly. If you have a crew of workers, you can cut down on hours or have multiple jobs going at once. The framing nailer is so fast and accurate that you can cut your crew in half or more depending on the job.
Durable
This type of tool is built to last. It can withstand almost anything, from being left in the rain to falling off a roof onto concrete. This durability makes buying a framing nailer not only a perfect idea, but a smart one.
Multiple and lightweight styles
Like any other tool, you can buy a framing nailer in many varieties and styles that can easily meet your needs. No matter which framing nailer you buy, you can use it for any project that may come up. One of the most popular models is very light and has many nails. The great lightness of this product is largely due to its design materials.
Cost effective
Using a framing nailer will save you money, as you won't use extra labor or waste nails. The job will also be completed faster so you can do multiple jobs.
Take the necessary precautions before using your device
It is true that with a carpentry nailer, the use of nails of considerable size does not pose too many problems, unlike with a hammer. However, accidents happen so quickly that it is necessary to protect yourself properly. To do this, wear protective eyewear and put on non-slip gloves to hold your framing nailer firmly.
Store your carpentry nailer properly
Like any other construction device, a framing nailer must be handled with care to ensure its longevity. Like any other piece of construction equipment, a nail gun must be handled with care to ensure its longevity. Also, be sure to keep it out of the reach of your children. To do this, after each use, put it back in its box to avoid all the likely shocks and dust.
Clean your carpentry nailer regularly
Before anything else, turn off the device and remove the cartridge containing the nails. Then, equip yourself with a visor, a screwdriver, a wrench depending on the model, a cleaning product or degreaser and lubricating oil. Gently open it and vacuum the deposits on the blades with a hand vacuum cleaner. Finally, spread the oil evenly over the rotor bearings before closing it.
Let your device rest after intensive use
As you use your framing nailer, it may overheat. Because of this, if it's a big job you need to undertake in a fairly short time, still take the time to turn it off from time to time so that its components can cool down. This is because it could cause a short circuit that could damage it.
Don't panic if your device suddenly stops working
At some point, sometimes no nails come out of your framing nailer. There's no need to worry about this! To do this, unplug it and remove the cartridge. Then check the size of your nails, as you may have inserted different sizes that are not included in your settings.
Every month we help more than 1 000 000 people buy better and smarter.
Copyright © 2022 - Made with ♥ by buyingbetter.co.uk
Your reviews and buying guides 0% advertising, 100% independent!